Simms

Simms Guide Classic Waders

Created for those who make the footprints, not follow them.

The Simms' Guide Classic Stockingfoot waders are a timeless package of durability and performance. Made in Montana with the legendary Gore-Tex waterproof and breathable fabrics, these waders are built for those fisherman who look for gear that’s built to last.

With features like a zipper chest pocket and tippet tender sleeve with retractor docking station, these waders are adventure ready and tough enough for any fishing obstacle. Built with Gore-Tex 3-layer laminate fabric to offer reliable waterproof performance all day without heavy weight or bulkiness, our Guide Classic Stockingfoot follows the Simms time honoured ethos of putting fishing perfection first and has all of the features necessary for any angler who loves to battle against adverse conditions.

  • Reach-through hand warmer chest pocket with zippered top stash pocket
  • Flip out zippered secure pocket for essentials at the ready
  • Anatomically engineered neoprene stockingfeet with built-in gravel guards
FABRIC TECH: GORE-TEX 3-Layer wader laminate with reinforced lower legs

Wader Care & Maintenance

Waders should be washed by hand, in a bathtub, in cold water using a powder detergent. Rinse thoroughly and allow to air dry, including the feet. Packaging or storing your waders wet may result in mildew and tape peeling. Simms Waders should not be dry-cleaned or put in the dryer. A water repellent treatment, such as Revivex®, will rejuvenate the water-resistant finish on your waders.

Applying Water Repellent Treatment

After the waders are washed and thoroughly rinsed, saturate the outside of the waders with Revivex® or other water repellent treatment. Allow product to drip-dry. "Set" the treatment with heat using a blow dryer or iron (low setting), avoiding the stockingfoot attachment area.

Repairing Your Simms GORE-TEX® Waders

Tears, punctures and pinholes do happen. Luckily, GORE-TEX® waders are easy to repair. 1) Turn waders inside out. 2) Apply rubbing alcohol to suspect area. Leaks will show as dark gray spots. 3) Immediately apply AquaSeal® to the area and cure for six hours. Please note: this method will not work on seam leaks.

Repairing pinholes

Repairing tear

Foot repair

Long-term Storage

It is best to clean the waders and check for leaks before storing. Apply self-repairs for pinholes or contact Simms for the return process for a complete wader evaluation. Dry waders completely before storing to avoid mildew. Store the waders away from heat or direct light. Hung in a closet on a hanger or laying flat under a bed is best for long-term wader storage.

Wader Care & Maintenance

Waders should be washed by hand, in a bathtub, in cold water using a powder detergent. Rinse thoroughly and allow to air dry, including the feet. Packaging or storing your waders wet may result in mildew and tape peeling. Simms Waders should not be dry-cleaned or put in the dryer. A water repellent treatment, such as Revivex®, will rejuvenate the water-resistant finish on your waders.

Applying Water Repellent Treatment

After the waders are washed and thoroughly rinsed, saturate the outside of the waders with Revivex® or other water repellent treatment. Allow product to drip-dry. "Set" the treatment with heat using a blow dryer or iron (low setting), avoiding the stockingfoot attachment area.

Repairing Your Simms GORE-TEX® Waders

Tears, punctures and pinholes do happen. Luckily, GORE-TEX® waders are easy to repair. 1) Turn waders inside out. 2) Apply rubbing alcohol to suspect area. Leaks will show as dark gray spots. 3) Immediately apply AquaSeal® to the area and cure for six hours. Please note: this method will not work on seam leaks.

Repairing pinholes

Long-term Storage

It is best to clean the waders and check for leaks before storing. Apply self-repairs for pinholes or contact Simms for the return process for a complete wader evaluation. Dry waders completely before storing to avoid mildew. Store the waders away from heat or direct light. Hung in a closet on a hanger or laying flat under a bed is best for long-term wader storage.

COME FISHING
Whether you’re a seasoned guide or a kid taking her first cast from the family dock. Whether your home waters are Tokyo Bay or Bristol Bay. Whether you pull a drift boat or tournament-ready rig, Simms is committed to lowering the barriers that stand between the world’s rivers, lakes and open waters and those who hear their call. Because we’ve seen with our own eyes the power our sport has to unite people, relieve stress, develop character, restore watersheds and ease personal suffering. Which is why we believe the more people who pick up a rod and take a cast, the better off we’ll all be.


JOHN SIMMS, VISIONARY GUIDE
Simms was founded in 1980 by visionary angler and longtime river guide John Simms. Having spent decades providing clients with life-changing experiences on the world’s most majestic rivers, John realized the waders available at that time weren’t up to the job of keeping the folks he was guiding dry, comfortable and safe on the river. Never mind the guides who, as he did, lived and breathed the sport 150+ days a year. So, he set about creating products worthy of a new generation of anglers who, like him, wanted to get out on the water earlier and stay out longer in any weather.
By the late 80's, John had put his namesake products on the map as the most rugged and dependable waders in the sport. Having set the company on the right path, he was ready to spend more time on the rivers he loved. After all, it was the reason he built those waders in the first place. At the same time, he wanted to ensure Simms would continue to craft the type of high-quality products the brand had become known for and anglers had come to depend on.


K.C. WALSH, REMAKING AN INDUSTRY

In 1993 K.C. Walsh, a lifelong angler raised in a multi-generational fishing family, combined two of his passions, fishing and guiding companies to realize their full potential. K.C. had spent his career helping companies grow and flourish as a management consultant. With K.C.’s rare combination of devotion to the sport and deep management experience, those close to the deal knew Simms would thrive. And thrive it has. In the almost 25 years under K.C.’s leadership, the quality of Simms products has continued to improve, the workforce has continued to grow and the product line has continued to expand.
K.C.’s first order of business back in 1993 was to move Simms' Headquarters to Bozeman, Montana. Relocating to Bozeman put Simms a stone’s throw from some of the most legendary fishing rivers in the world. And where there’s great fishing, there are great fishermen. Simms taps into the experience of these expert anglers, employing them at every level and in every role, from designers, developers and product managers, to wear testers, consultants and craftspeople.


GORE-TEX® WADERS MADE IN BOZEMAN, MONTANA
That first year also saw the release of Simms’ first-ever waterproof, breathable wader featuring GORETEX® construction. The wader was a groundbreaking success and would prove to be the beginning of a long and productive partnership between Simms and W.L. Gore & Associates. Since then, Simms has become known as a place the fishing industry looks for the latest advances in GORE-TEX technology.
In 2012, Simms expanded its presence in Bozeman with a new 60,000 square-foot facility housing its corporate headquarters and wader production facility. The expansion has provided elbow room to drive product development, solidified Simms as the sole fishing wader manufacturer in the USA and showcases our unwavering commitment to high quality, U.S.-based manufacturing. Today, Simms is recognized as a global leader in the fishing industry and employs more than 180+ at its Bozeman headquarters.

COME FISHING
Whether you’re a seasoned guide or a kid taking her first cast from the family dock. Whether your home waters are Tokyo Bay or Bristol Bay. Whether you pull a drift boat or tournament-ready rig, Simms is committed to lowering the barriers that stand between the world’s rivers, lakes and open waters and those who hear their call. Because we’ve seen with our own eyes the power our sport has to unite people, relieve stress, develop character, restore watersheds and ease personal suffering. Which is why we believe the more people who pick up a rod and take a cast, the better off we’ll all be.


JOHN SIMMS, VISIONARY GUIDE
Simms was founded in 1980 by visionary angler and longtime river guide John Simms. Having spent decades providing clients with life-changing experiences on the world’s most majestic rivers, John realized the waders available at that time weren’t up to the job of keeping the folks he was guiding dry, comfortable and safe on the river. Never mind the guides who, as he did, lived and breathed the sport 150+ days a year. So, he set about creating products worthy of a new generation of anglers who, like him, wanted to get out on the water earlier and stay out longer in any weather.
By the late 80's, John had put his namesake products on the map as the most rugged and dependable waders in the sport. Having set the company on the right path, he was ready to spend more time on the rivers he loved. After all, it was the reason he built those waders in the first place. At the same time, he wanted to ensure Simms would continue to craft the type of high-quality products the brand had become known for and anglers had come to depend on.


K.C. WALSH, REMAKING AN INDUSTRY

In 1993 K.C. Walsh, a lifelong angler raised in a multi-generational fishing family, combined two of his passions, fishing and guiding companies to realize their full potential. K.C. had spent his career helping companies grow and flourish as a management consultant. With K.C.’s rare combination of devotion to the sport and deep management experience, those close to the deal knew Simms would thrive. And thrive it has. In the almost 25 years under K.C.’s leadership, the quality of Simms products has continued to improve, the workforce has continued to grow and the product line has continued to expand.
K.C.’s first order of business back in 1993 was to move Simms' Headquarters to Bozeman, Montana. Relocating to Bozeman put Simms a stone’s throw from some of the most legendary fishing rivers in the world. And where there’s great fishing, there are great fishermen. Simms taps into the experience of these expert anglers, employing them at every level and in every role, from designers, developers and product managers, to wear testers, consultants and craftspeople.


GORE-TEX® WADERS MADE IN BOZEMAN, MONTANA
That first year also saw the release of Simms’ first-ever waterproof, breathable wader featuring GORETEX® construction. The wader was a groundbreaking success and would prove to be the beginning of a long and productive partnership between Simms and W.L. Gore & Associates. Since then, Simms has become known as a place the fishing industry looks for the latest advances in GORE-TEX technology.
In 2012, Simms expanded its presence in Bozeman with a new 60,000 square-foot facility housing its corporate headquarters and wader production facility. The expansion has provided elbow room to drive product development, solidified Simms as the sole fishing wader manufacturer in the USA and showcases our unwavering commitment to high quality, U.S.-based manufacturing. Today, Simms is recognized as a global leader in the fishing industry and employs more than 180+ at its Bozeman headquarters.

You may also like